## Macro Command Reference

`setutimestring <time> <TIMEFORMAT> <var>`

Defines a time string variable from unix timestamp.

`TIMEFORMAT`

Plot stores time data as the number of seconds relative to an absolute reference time: the first instant of 1 January, 2001, Greenwich Mean Time (GMT). Dates before then are stored as negative numbers; dates after then are stored as positive numbers.

To convert a UNIX time to a Plot time simply subtract 978307200.0 from the UNIX time.

## Time format tokens

Field | Sym. | No. | Example | Description
era | G | 1..3 | AD | Era - Replaced with the Era string for the current date. One to three letters for the abbreviated form, four letters for the long form, five for the narrow form.
4 | Anno Domini
5 | A
year | y | 1..n | 1996 | Year. Normally the length specifies the padding, but for two letters it also specifies the maximum length. Example:
Year | y | yy | yyy | yyyy | yyyyy
AD 1 | 1 | 01 | 001 | 0001 | 00001
AD 12 | 12 | 12 | 012 | 0012 | 00012
AD 123 | 123 | 23 | 123 | 0123 | 00123
AD 1234 | 1234 | 34 | 1234 | 1234 | 01234
AD 12345 | 12345 | 45 | 12345 | 12345 | 12345
Y | 1..n | 1997 | Year (in "Week of Year" based calendars). Normally the length specifies the padding, but for two letters it also specifies the maximum length. This year designation is used in ISO year-week calendar as defined by ISO 8601, but can be used in non-Gregorian based calendar systems where week date processing is desired. May not always be the same value as calendar year.
u | 1..n | 4601 | Extended year. This is a single number designating the year of this calendar system, encompassing all supra-year fields. For example, for the Julian calendar system, year numbers are positive, with an era of BCE or CE. An extended year value for the Julian calendar system assigns positive values to CE years and negative values to BCE years, with 1 BCE being year 0.
U | 1..3 | 甲子 | Cyclic year name. Calendars such as the Chinese lunar calendar (and related calendars) and the Hindu calendars use 60-year cycles of year names. Use one through three letters for the abbreviated name, four for the full name, or five for the narrow name (currently the data only provides abbreviated names, which will be used for all requested name widths). If the calendar does not provide cyclic year name data, or if the year value to be formatted is out of the range of years for which cyclic name data is provided, then numeric formatting is used (behaves like 'y').
4 | (currently also 甲子)
5 | (currently also 甲子)
quarter | Q | 1..2 | 02 | Quarter - Use one or two for the numerical quarter, three for the abbreviation, or four for the full name.
3 | Q2
4 | 2nd quarter
q | 1..2 | 02 | Stand-Alone Quarter - Use one or two for the numerical quarter, three for the abbreviation, or four for the full name.
3 | Q2
4 | 2nd quarter
month | M | 1..2 | 09 | Month - Use one or two for the numerical month, three for the abbreviation, four for the full name, or five for the narrow name.
3 | Sept
4 | September
5 | S
L | 1..2 | 09 | Stand-Alone Month - Use one or two for the numerical month, three for the abbreviation, or four for the full name, or 5 for the narrow name.
3 | Sept
4 | September
5 | S
l | 1 | (nothing) | This pattern character is deprecated, and should be ignored in patterns. It was originally intended to be used in combination with M to indicate placement of the symbol for leap month in the Chinese calendar. Placement of that marker is now specified using locale-specific <monthPatterns> data, and formatting and parsing of that marker should be handled as part of supporting the regular M and L pattern characters.
week | w | 1..2 | 27 | Week of Year.
W | 1 | 3 | Week of Month
day | d | 1..2 | 1 | Date - Day of the month
D | 1..3 | 345 | Day of year
F | 1 | 2 | Day of Week in Month. The example is for the 2nd Wed in July
g | 1..n | 2451334 | Modified Julian day. This is different from the conventional Julian day number in two regards. First, it demarcates days at local zone midnight, rather than noon GMT. Second, it is a local number; that is, it depends on the local time zone. It can be thought of as a single number that encompasses all the date-related fields.
week day | E | 1..3 | Tues | Day of week - Use one through three letters for the short day, or four for the full name, five for the narrow name, or six for the short name.
4 | Tuesday
5 | T
6 | Tu
e | 1..2 | 2 | Local day of week. Same as E except adds a numeric value that will depend on the local starting day of the week, using one or two letters. For this example, Monday is the first day of the week.
3 | Tues
4 | Tuesday
5 | T
6 | Tu
c | 1 | 2 | Stand-Alone local day of week - Use one letter for the local numeric value (same as 'e'), three for the short day, four for the full name, five for the narrow name, or six for the short name.
3 | Tues
4 | Tuesday
5 | T
6 | Tu
period | a | 1 | AM | AM or PM
hour | h | 1..2 | 11 | Hour [1-12]. When used in skeleton data or in a skeleton passed in an API for flexible date pattern generation, it should match the 12-hour-cycle format preferred by the locale (h or K); it should not match a 24-hour-cycle format (H or k). Use hh for zero padding.
H | 1..2 | 13 | Hour [0-23]. When used in skeleton data or in a skeleton passed in an API for flexible date pattern generation, it should match the 24-hour-cycle format preferred by the locale (H or k); it should not match a 12-hour-cycle format (h or K). Use HH for zero padding.
K | 1..2 | 0 | Hour [0-11]. When used in a skeleton, only matches K or h, see above. Use KK for zero padding.
k | 1..2 | 24 | Hour [1-24]. When used in a skeleton, only matches k or H, see above. Use kk for zero padding.
j | 1..2 | n/a | This is a special-purpose symbol. It must not occur in pattern or skeleton data. Instead, it is reserved for use in skeletons passed to APIs doing flexible date pattern generation. In such a context, it requests the preferred hour format for the locale (h, H, K, or k), as determined by whether h, H, K, or k is used in the standard short time format for the locale. In the implementation of such an API, 'j' must be replaced by h, H, K, or k before beginning a match against availableFormats data. Note that use of 'j' in a skeleton passed to an API is the only way to have a skeleton request a locale's preferred time cycle type (12-hour or 24-hour).
minute | m | 1..2 | 59 | Minute. Use one or two for zero padding.
second | s | 1..2 | 12 | Second. Use one or two for zero padding.
S | 1..n | 3456 | Fractional Second - truncates (like other time fields) to the count of letters. (example shows display using pattern SSSS for seconds value 12.34567)
A | 1..n | 69540000 | Milliseconds in day. This field behaves exactly like a composite of all time-related fields, not including the zone fields. As such, it also reflects discontinuities of those fields on DST transition days. On a day of DST onset, it will jump forward. On a day of DST cessation, it will jump backward. This reflects the fact that is must be combined with the offset field to obtain a unique local time value.
zone | z | 1..3 | PDT | The short specific non-location format. Where that is unavailable, falls back to the short localized GMT format ("O").
4 | Pacific Daylight Time | The long specific non-location format. Where that is unavailable, falls back to the long localized GMT format ("OOOO").
Z | 1..3 | -0800 | The ISO8601 basic format with hours, minutes and optional seconds fields. The format is equivalent to RFC 822 zone format (when optional seconds field is absent). This is equivalent to the "xxxx" specifier.
4 | GMT-8:00 | The long localized GMT format. This is equivalent to the "OOOO" specifier.
5 | -08:00 -07:52:58 | The ISO8601 extended format with hours, minutes and optional seconds fields. The ISO8601 UTC indicator "Z" is used when local time offset is 0. This is equivalent to the "XXXXX" specifier.
O | 1 | GMT-8 | The short localized GMT format.
4 | GMT-08:00 | The long localized GMT format.
v | 1 | PT | The short generic non-location format. Where that is unavailable, falls back to the generic location format ("VVVV"), then the short localized GMT format as the final fallback.
4 | Pacific Time | The long generic non-location format. Where that is unavailable, falls back to generic location format ("VVVV").
V | 1 | uslax | The short time zone ID. Where that is unavailable, the special short time zone ID unk (Unknown Zone) is used. Note: This specifier was originally used for a variant of the short specific non-location format, but it was deprecated in the later version of this specification. In CLDR 23, the definition of the specifier was changed to designate a short time zone ID.
2 | America/Los_Angeles | The long time zone ID.
3 | Los Angeles | The exemplar city (location) for the time zone. Where that is unavailable, the localized exemplar city name for the special zone Etc/Unknown is used as the fallback (for example, "Unknown City").
4 | Los Angeles Time | The generic location format. Where that is unavailable, falls back to the long localized GMT format ("OOOO"; Note: Fallback is only necessary with a GMT-style Time Zone ID, like Etc/GMT-830.) This is especially useful when presenting possible timezone choices for user selection, since the naming is more uniform than the "v" format.
X | 1 | -08 +0530 Z | The ISO8601 basic format with hours field and optional minutes field. The ISO8601 UTC indicator "Z" is used when local time offset is 0. (The same as x, plus "Z".)
2 | -0800 Z | The ISO8601 basic format with hours and minutes fields. The ISO8601 UTC indicator "Z" is used when local time offset is 0. (The same as xx, plus "Z".)
3 | -08:00 Z | The ISO8601 extended format with hours and minutes fields. The ISO8601 UTC indicator "Z" is used when local time offset is 0. (The same as xxx, plus "Z".)
4 | -0800 -075258 Z | The ISO8601 basic format with hours, minutes and optional seconds fields. The ISO8601 UTC indicator "Z" is used when local time offset is 0. (The same as xxxx, plus "Z".) Note: The seconds field is not supported by the ISO8601 specification.
5 | -08:00 -07:52:58 Z | The ISO8601 extended format with hours, minutes and optional seconds fields. The ISO8601 UTC indicator "Z" is used when local time offset is 0. (The same as xxxxx, plus "Z".) Note: The seconds field is not supported by the ISO8601 specification.
x | 1 | -08 +0530 | The ISO8601 basic format with hours field and optional minutes field. (The same as X, minus "Z".)
2 | -0800 | The ISO8601 basic format with hours and minutes fields. (The same as XX, minus "Z".)
3 | -08:00 | The ISO8601 extended format with hours and minutes fields. (The same as XXX, minus "Z".)
4 | -0800 -075258 | The ISO8601 basic format with hours, minutes and optional seconds fields. (The same as XXXX, minus "Z".) Note: The seconds field is not supported by the ISO8601 specification.
5 | -08:00 -07:52:58 | The ISO8601 extended format with hours, minutes and optional seconds fields. (The same as XXXXX, minus "Z".) Note: The seconds field is not supported by the ISO8601 specification.

## Old time format tokens

This is only used if your time format contains at least one %. You should not use this syntax, it is only available for compatibility with older files

%a | Abbreviated weekday name
%A | Full weekday name
%b | Abbreviated month name
%B | Full month name
%c | Shorthand for “x", the locale format for date and time
%d | Day of the month as a decimal number (01-31)
%e | Same as %d but does not print the leading 0 for days 1 through 9 (unlike strftime(), does not print a leading space)
%F | Milliseconds as a decimal number (000-999)
%H | Hour based on a 24-hour clock as a decimal number (00-23)
%I | Hour based on a 12-hour clock as a decimal number (01-12)
%j | Day of the year as a decimal number (001-366)
%m | Month as a decimal number (01-12)
%M | Minute as a decimal number (00-59)
%p | AM/PM designation for the locale
%S | Second as a decimal number (00-59)
%w | Weekday as a decimal number (0-6), where Sunday is 0
%x | Date using the date representation for the locale, including the time zone (produces different results from strftime())
%X | Time using the time representation for the locale (produces different results from strftime())
%y | Year without century (00-99)
%Y | Year with century (such as 1990)
%Z | Time zone name (such as Pacific Daylight Time; produces different results from strftime())
%z | Time zone offset in hours and minutes from GMT (HHMM)